• Disposable (Temporary) Email Addresses Are Not Allowed On Registration - IP Will Be Banned Permanently.

Hack Any WIFI Kali Linux Tutorials


Crack Any WIFI Without Brute-Forcing And Anonymously

1. Kali Linux

2. Fluxion ( Tool)

3. Some Patience And Mind

Ok so how does fluxion work?

Fluxion is gonna to do 2 attack :

Deauthentication alias Deauth

Fake AP

De-authentication- The attack will send hundreds or thousands of deauthentications packets to a target to kick him/her out of the WIFI you can even kick all the users on it.

Fake AP- AP : It stands for Access Point when you connect to a WIFI, at the time when you connect to the AP of the router so like the login page of it. So fluxion will clone the WIFI by his handshake and create an Fake AP so the users will connect to it thinking its the real WIFI alias AP but nah its not the password will be sent that back to us i mean to you.

How will the attack go?

Fluxion will starting capturing of the handshake between the WIFI like the MAC address(MAC addresses looks like this “2D:K4:C4:5T”) after that he captures it he knows how the AP looks like etc so he will clone it and do next actions.

After that this will kick everyone those who are connected with the WIFI by the Deauthentication on everyone, then they will connect back to the AP thinking they are connection back to the WIFI big mistake the password they type will sent back to you, thats all. ; )

Fluxion is a smart tool.

Lets install Fluxion!

Open your terminal on you linux machine and type this cd Desktop it should says like this “root@examplename:~/Desktop#”

Then type next command on terminal i.e. git clone https://github.com/FluxionNetwork/fluxion.

Note: Wait for it to clone and this will download it on your desktop…

Ok now write command in the terminal cd fluxionor whatever the file is named it should say “root@examplename:~/Desktop/fluxion#”

Then enter command in terminal ls and it should have a file call fluxion.sh so do ./fluxion.sh if it says “Permission denied” do chmod +x fluxion.sh then do fluxion.sh

There now lets get this attack done!

So launch it by doing fluxion.sh like we did it before.

1. Select your channel, channel means WIFI.
2. Select the WIFI you wanna to crack.
3. Now select the “FakeAP – Hostapd(Recommended)” as its the best for crack.
4. Then select your handshake that you wanna to use. (Recommended) to select “pyrit“.
5. Select your capture handshake select to the “Deauth all“.
6. Now you need to wait until it will capture the handshake so when its done it should have some “WPA handshake:” somewhere and after that “handshake:” it would have a MAC address like this “68:C4:4D:85:AC:B8”.
7. After that select “Check handshake“.
8. After this select “Create a SSL certificate”
9. Then select “Web Interface“
10. Select the language of the page which you feel better and will be in.
11. Then wait until he/she will login and type the password of the WiFi after that you will receive the password.

backing track app, backtrack, backtrack 5 download, backtrack download, backtrack linux, best linux for security, best wifi adapter for pentesting, best wifi hacker app for android without root, cain and abel tutorial wifi password pdf, cowpatty windows 7, crack pass wifi, diolinux, easy wifi hack, evogame.net/wifi hacker, free wifi hack, free wifi password, hack into wifi password, hack peoples wifi, hack someones wifi, hack wifi, hack wpa2, hacking test sites, how do u hack wifi, how to connect others wifi without password, how to crack wifi password, how to enable monitor mode in kali linux, how to get wifi password of neighbors, how to hack a network server, how to hack a network using ip address, how to hack a secured wifi network, how to hack any wifi network, how to hack in to wifi, how to hack other peoples wifi, how to hack password protected wifi, how to hack router, how to hack somebody wifi, how to hack wifi, how to hack wifi internet connection, how to hack wifi internet connection on pc, how to hack wifi on android, how to hack wifi password, how to hack wifi password 2018, how to hack wifi password in mobile, how to hack wifi password on android, how to hack wifi password on iphone, how to hack wifi password on laptop, how to hack wifi password using cmd, how to hack wifi password with root, how to hack wifi password without root, how to hack wifi password without software, how to hack wifi using cmd, how to hack wifi video download, how to hack with kali linux, how to hack your wifi password, how to install kali linux, ip webcam, iptv, is it easy to hack wifi, kali, kali 2 0, kali 2016, kali download, kali linux, kali linux 2 0, kali linux 2016, kali linux 2016 2, kali linux android, kali linux download, kali linux for pc, kali linux iso, kali linux laptop, kali linux light, kali linux os, kali linux virtual machine, kali linux vm, kali linux vmware, kali linux wifi, kali linux wpa, kali network tools, kali os, kali tools, kali wifi, kali wifi hacker, kali wifi sniffing, kali wifi tools, linux wifi tools, penetration testing with kali linux, pldt wifi hacker, python password cracker script, root hack, using kali linux, web penetration testing with kali linux, wifi, wifi cracker, wifi hack, wifi hack full apk, wifi hacker, wifi hacker apk, wifi hacker apk 2.0 free download, wifi hacker app, wifi hacker app download, wifi hacker app for android that really works, wifi hacker online, wifi hacker original, wifi hacker software, wifi password, wifi password breaker, wifi password cracker, wifi password finder, wifi password hacker, wifi password hacker apk, wifi password hacker app, wifi password show, wifi penetration testing, wifi penetration testing tools, wifi pentesting tools, wifi sniffing kali, wifi stealer, wifiphisher, wpa hacker, wpa2 crack, wps hacker


How to Hack WiFi passwords [Using Kali Linux]

Tools need to be downloaded:-

Steps :

1] Request PMKID from the router

Unlike older techniques where you had to wait until a user connected to the access point so that you can capture the 4-way handshake that is of EAPOL.This new method for finding out the password credentials does not require that anymore. The attack works on the RSN-IE or Robust Security Network Information Element. It only uses one frame which it requests from the wireless router.

2] Install Hcxdumptool & Hcxpcaptool

This is a tool that will help you to capture the PMKID packet from the access point. After capturing the frame, it can also dump it into a file for you. Below are some features of Hcxdumptool:

Can easily capture identities and usernames from a WLAN.Can easily capture passwords, plain master keys, handshakes and PMKIDs from traffic on WLAN.

After installing this tool run the below command in the CLI.

$ ./hcxdumptool -o test.pcapng -i wlp39s0f3u4u5 –enable_status
The command displayed above will dump the frame to a file.

3] After doing the above step now you will need to extract some contents from the frame file. This will be in the pcapng format. You can easily convert this into a hash format which the popular program ‘Hashcat‘ can accept. Use the below command to extract the pcapng file.

$ ./hcxpcaptool -z test.16800 test.pcapng
4] Using Hashcat to Crack the Wifi Password (WPA PSK Pre-Shared Key Recovery)

Hashcat is a tool used a lot in the security and penetration testing field. It is used by both hackers and researchers for finding out passwords by cracking their hash. After finding out the hash of the password you can enter the password in hashcat and it will find it out for you. It will take some time depending on how complex the password is of the wireless network. Enter the cmd below and run hashcat.

$ ./hashcat -m 16800 test.16800 -a 3 -w 3 ‘?l?l?l?l?l?lt!’



It's is a WiFi hacking tool that can execute speedy automated phishing attacks against Wireless/ WiFi networks with the intention of discovering user and password credentials.

Link : https://github.com/wifiphisher/wifiphisher

wifiphisher step by step, wifiphisher network down, wifiphisher for windows 10, wifiphisher for android, wifiphisher for mac, wifiphisher for termux, wifiphisher for windows 8.1, wifiphisher for kali linux, wifiphisher for ubuntu, wifiphisher download for linux, download wifiphisher for iphone, wifiphisher in termux, wifiphisher in kali linux, wifiphisher in ubuntu, wifiphisher in windows, wifiphisher download in linux, wifiphisher address already in use, wifiphisher are used in conjunction, install wifiphisher in termux, tools like wifiphisher, programs like wifiphisher, alternative of wifiphisher, wifiphisher on android, wifiphisher on windows, wifiphisher on kali linux, wifiphisher on ubuntu, wifiphisher on mac, wifiphisher on nethunter, wifiphisher on github, wifiphisher on wifislax, install wifiphisher on windows, install wifiphisher on kali nethunter, wifiphisher pro apk, better than wifiphisher, wifiphisher how to use, wifiphisher failed to find an interface, wifiphisher how to install, wifiphisher hostapd failed to launch, alternative to wifiphisher, similar to wifiphisher, wifiphisher-master how to use, wifiphisher vs fluxion, wifiphisher vs, wifiphisher vs lonset, wifiphisher vs airgeddon, wifiphisher vs linset, wifiphisher with one adapter, wifiphisher with one card, wifiphisher with one wireless card, hack with wifiphisher


Hack any WPA2/WEP/WPA Wifi using Dumpper and Jumpstart





(If you won't find those tools ok given url, just search on Google you will get crack of those tools)

You need to have Microsoft .NET Framework installed on your computer as well, or this will not work.

This method is for only Desktops..


1] Download and install JumpStart, WinPcap, and Dumpper

2] Open Dumpper. It’ll be in Spanish, so go to the far right tab and select ‘English’ in between the other two options.Your programs are set up and ready to go, now begin the process

3] In the ‘Networks’ tab, select the network adapter you wish to use. Hit the ‘Scan’ button now.

4] After it completes the scan, go over to the ‘Wps’ tab. In the area that says ‘Connect using JumpStart’, hit ‘Browse’ to select the location of where you installed JumpStart in the previous set-up steps. (By default, it installs in C:program Files (x86)Jumpstart. Don’t open it, just select the ‘Jumpstart’ folder and click ‘OK’)

5] In the area ‘Show default pin’, select ‘All networks’ isntead of ‘Only known networks’.

6] Hit the ‘Scan’ button.

7] Select the network you wish to penetrate. Remember the ‘Pin’ corresponding to your network in the scan results, this will be needed for later.

8] In the previous area ‘Connect using Jumpstart’, hit the ‘Start JumpStart’ button.

9] Under ‘What do you want to do?’, select ‘Join a wireless network’ and hit ‘Next’

10] Under ‘Which setup method do you want to use?’, select “Enter the PIN from my access point” and enter the PIN next to your network in the scan section back in the previous scan results.

11] Finally, select the targeted network from before and hit ‘Next’.Now you’re happily connected to that WiFi network you just penetrated. Do you want to see the password so you can get on from other devices without doing this process? Sure! Follow these simple steps.

12] Open the menu where you join WiFi networks/view the network you’re connected to.

13] Right click on the network you just joined and hit ‘Properties’Under the ‘Security’ tab, you can see the password, but it’s just dots.

14] Check the ‘Show characters’ box under it.The password will then reveal itself.

After downloading tools...wait for 4-5 hours to start the software
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock